Operating supply voltage, VAC | 230 |
Voltage to maintain normal operation, V – alternating current – direct current -voltage of DC backup power (optional) | 100 – 265 140 – 375 7 – 24 |
Supply frequency, Hz | 47 – 63 |
Data Exchange Interface over the Ethernet network | 10BASE-T/100BASE-T (twisted pair) |
Supported Ethernet protocols | ARP, IP, TCP, Modbus TCP, HTTP |
Maximum number of connections over the Modbus TCP protocol | 11 |
Integrated servers | Modbus-server, HTTP-server |
Data Exchange Interface over the Modbus network | RS-485 |
Modbus network exchange modes | Driving (Master) / Driven (Slave) |
Supported Modbus protocols | Modbus RTU, Modbus ASCII |
RS-485 driver maximum output voltage, V | 3.3 |
RS-485 output current of short circuit driver (limiting), mA | 250 |
RS-485 receiver input current, mA, no more than | 0.125 |
Integrated terminal resistance, Ohm | 300 |
Recommend number of connected units within the Modbus network: - when receivers input current of RS-485 bus is doesn’t more 0.125 mA
- when receivers input current of RS-485 bus is doesn’t more 1mA
| 256, not more 32, not more |
Indication | LEDs |
Readiness time upon switching the unit to the mains, sec, not more than | 1 |
Rower consumption, VA, not more than | 1.2 |
Weight, kg, at most | 0.200 |
Dimensions, mm | 95 х 52 х 67 |
Unit purpose | Communication |
Nominal operation condition | Continuous |
Cross section of terminals connection wires, mm² | 0.5 – 2.5 |
Terminal screws, N*m | 0.4 |
Level of unit protection: | IP20 |
Protection class against electrical shock | II |
Permissible pollution density | II |
Overvoltage category | II |
Rated insulation voltage, V | 450 |
Rated impulse withstand voltage, kV | 2.5 |
Operating position | Arbitrary |
Pollutants in the amount, which is not to exceed the maximum permissible concentration | None |